Aktiivkõlar RCF ART 715-A MK4

660.00 €
Hind km-ga: Jah Ei
Järelmaks: Al 16.04 € kuus

Korvi lisatud toodetele saab ka paari klikiga küsida nimelise ja ametliku hinnapakkumise, soovi korral koos paigaldusega.

  • Eesti piires on kohaletoimetamine tasuta

Tegu on oma kategoorias ainulaadse aktiivkõlariga, mille spetsiaalselt disainitud ning suure jõudlusega mähisega kõrghelielement võimaldab ainulaadset vokaali selgust ja heliprojektsiooni. 15″ madalsageduselement loob väga lineaarse ja täpse heli taasesituse ning mängib ka päris madalaid sagedusi detailselt.

Antud aktiivkõlar on toodetud kõige kõrgtasemelisemaid montaažitehnoloogiaid kasutades. Võimendi pakub 1400W jõudlust ning see on kontrollitud digitaalse protsessori poolt, mis juhib crossoveri funktsiooni, heli tämbrit (ekvalaiseri roll), faasiühildumist, pehmet limitteri funktsiooni ja kaitseb kõlarielemente ülekoormuse eest.

Selle mudeli puhul on kasutusel uudne Firphase-protsessing, mille puhul juhib algoritm signaali viidet ja amplituudi erinevate sageduste lõikes võttes arvesse kõlarikasti ja kõlarielementide omapära ning helitugevust. Selle tulemusel saavutatakse veelgi selgem ja lineaarsem helipilt.

RCF helitehnika on hinnatud muusikute poolt üle maailma.

Terve Eesti piires on kohaletoomine tasuta.

Seade on toodetud Itaalias kvaliteet-helitehnika tootja RCF poolt, järgnev info on pärit tootja kodulehelt:

KasutusjuhendManuale ART7 MK4

Joonised: 13000524 – ART 715-A MK4


Suure võimsuse, kvaliteetsete komponentide ja väga hea helipildiga aktiivkõlar mis sobib järgmistesse kasutusvaldkondadesse:

  • PA erinevates rakendustes
  • kirikutesse, teatritesse, teemaparkidesse
  • kompaktse live esinemiste osana
  • lavamonitorideks

Tehniline külg:

  • 1400 W peak
  • 700W RMS
  • digitaalne võimendus ja protsessing
  • helirõhk 130 dB
  • 15″ madalsageduselement
  • 1″ kõrgsageduselement

Pakume seadmele 3 aastat garantiid ning tasuta asendusseadet mõne päeva jooksul kui tehnika peaks garantiiremonti minema.



  • 130 dB Max SPL
  • 1400 WATT 2-way peak power
  • Innovative DSP Processing
  • 1″ Compression Driver, 1.75″ v.c.
  • 15″ Woofer
  • 90°x60°, wide dispersion constant directivity horn
  • FiRPHASE Technology
  • Frequency Response -3 dB:45 Hz ÷ 20000 Hz
  • Max SPL:130 dB
  • Horizontal coverage angle:90°
  • Vertical coverage angle:60°
  • Compression Driver:1″, 1.75″ v.c.
  • Woofer:15″, 2.5″ v.c.
  • Input signal:bal / unbal
  • Input connectors:XLR-Jack
  • Output connectors:XLR
  • Input sensitivity:-2 dBu / +4 dBu
  • Crossover frequencies:1600 Hz
  • Protections:Thermal, rms
  • Limiter:Soft limiter
  • Controls:Volume, Boost, Mic/Line
  • Total power:1400 W PEAK
  •    High frequencies:400 W PEAK
  •    Low frequencies:1000 W PEAK
  • Total power:700 W RMS
  •    High frequencies:200 W RMS
  •    Low frequencies:500 W RMS
  • Cooling:Convection / forced
  • Connections:VDE connector in
  • Cabinet Material:Composite PP
  • Hardware:2xM10 flying p.
  • Handles:2 side, 1 top
  • Pole Mount/Cap:Yes
  • Colour:Black
  • Height:708 / 27.87 mm/inch
  • Width:437 / 17.2 mm/inch
  • Depth:389 / 15.31 mm/inch
  • Net Weight:19.6 / 43.21 kg/lbs



The ART Series is the beating heart of RCF. These multiple purpose active speakers represent the finest examples of audio design in a rugged composite cabinet, now in black.

The MK4 Series is equipped with a new generation of 2-way Class-D fan-less amplifiers, high-powered woofers and the latest compression driver technology, plus a redesigned front grille.

The ART concept offers the best audio choice for a multitude of live sound applications in a plug‘n’go device. Just connect your microphone, your mixer or your audio device to the speaker and turn up the volume: there are no complex menus, no knobs to understand.




silicon surround structure


RCF’s Class-D power amplifier technology packs huge performance operating with high efficiency into a lightweight solution. Class-D amplifiers deliver ultra-fast attack, realistic transient response and impressive audio performance. The amplifier features a solid mechanical aluminium structure which not only stabilises the amplifier during transportation but also helps the fan-less heat dissipation. All the Art 7 series amplifiers present SMPS power supply section in order to produce maximum output and minimum transportation weight.



RCF speakers are designed by using FiRPHASE, a proprietary and advanced FIR filtering technology, conceived for delivering transparent sound, absolute clarity and perfect stereo images to the listener. The FiRPHASE algorithm optimizes dynamics, amplitude and phase patterns, ensuring at the same time minimum system latency.

silicon surround structure
double nomex layer


The amplifier presents both XLR In/Out connectors and a Jack input for the maximum connection versatility.

double nomex layer


A switchable EQ Mode makes it easier to select among two different equalisation presets:

– BOOST: extended response switch that slightly emphasizes the bass response for playback music and low volume applications;

– FLAT: linear response switch, when the speaker is used to amplify a live mix. The amplifier has a built in limiter circuit to prevent clipping or overdriving the transducers.


A useful Mic/Line switch helps adjusting the input sensitivity. When used for speech, the [Mic] setting allows to use a microphone directly with the speaker. Set the selector to [Line] when using the speaker for live music or playback.

double nomex layer


An easy to reach volume knob on the back allows to set the overall volume of the speaker according to its application.

silicon surround structure


3 status LEDs – Limiter / Signal / Status are provided for monitoring the system.




silicon surround structure


Woofers and compression drivers are precision built taking advantage of RCF’ s assembly technologies and a wealth of professional knowledge and experience dedicated to achieving extremely high standards.





The RCF ART 7 Series has earned the prestigious international Red Dot Design Award in the Product Design category. Receiving the renowned Red Dot acts as proof of the excellent design achievements of professionals and up-and-coming talent alike, thus symbolising a seal of quality. With its outstanding and innovative design, the Art 7 Series has succeeded in one of the most renowned and most difficult international design competitions worldwide. High quality materials, precise manufacturing, careful assembly and extensive quality control procedures complete the groundbreaking design work of the RCF R&D team.

The sturdy, ergonomic cabinet is easy to carry thanks to the rubber-coated plastic handle. Take the ART 7 everywhere with you.

A side handle with internal rubber handgrip allows to firmly hold the cabinet and move it easily. Ergonomic design and carefully designed proportions, for all your transport needs.

At the bottom of the speakers there is a robust steel pole mount, allowing to place the speaker on a stand or on a subwoofer with full safety and stability.

Thanks to the rear profile of the cabinet, the ART 7 Series speakers can be easily used as stage monitors whatever the needs of musicians. Internal reinforcements prevent any deformation of the cabinet.



silicon surround structure


RCF speakers are designed by using FiRPHASE, a proprietary and advanced FIR filtering technology, conceived for delivering transparent sound, absolute clarity and perfect stereo images to the listener. The FiRPHASE algorithm optimizes dynamics, amplitude and phase patterns, ensuring at the same time minimum system latency.

silicon surround structure


The design of the FIR filter for this specific purpose should start from an accurate measurement of the loudspeaker phase. The FiRPHASE algorithm uses this measurement and adapts the loudspeaker’s phase without touching the amplitude equalization. The heart of the advanced technique used by FiRPHASE is a recursive method (Least Squared method) combined with a proprietary algorithm that calculates the best FIR filter coefficients set in according to amplitude and phase constraints. The algorithm corrects phase and amplitude (when necessary) by taking into account the weak points of the transducers and the resonances or cancellations due to the cabinet of the loudspeaker. Despite the design perfection of our transducers and cabinets, we realize that the phase corrections are the “missing point” for the perfection. This technique allows a deep control of phase at mid-low frequencies with relatively small filters, reaching a higher resolution than that one as theory suggests.


Arvuta kuumakse